Windows 10 reboot loop with Your PC ran into a problem and needs to – Microsoft Community – Quick Fix Windows 10 Reboot Loop/Keeps Restarting Error

Previous Windows versions would need a full reinstall to resolve the restart loop. However, with Windows 10, you can quickly troubleshoot and fix an endless reboot loop plus any other problems you may be experiencing. There are several reasons why your computer is stuck in a restart loop, which is characterized by failure of Windows to load up correctly once you power on your PC. Instead of booting normally, the PC will fail to reach the logon screen before it resets to the boot screen and tries to load Windows.

From here on, the operating system is caught in an endless loop of booting and crashing, rendering your PC impossible to use. Unplugging all such peripherals from your PC and performing a hard reset may help resolve the infinite reboot loop. You can leave only your keyboard, mouse and monitor and then unplug your PC from the power outlet.

If your computer comes with a removable battery, remove it and then hold the power button down for about 15 seconds until it goes off. Put the battery back in, plug the wall power back into your PC and try to restart it. If Windows 10 is still stuck in a restart loop after unplugging peripherals and performing a hard reset , you can try to bypass the restart screen using the Function FN key. Hold the FN key down as you power on your PC, and while still holding the key, tap the Windows key to bypass the restart.

If this works, you should see the login screen and you can continue using your PC normally. Automatic Repair is a recovery feature in Windows 10 that kicks in when the operating system is unable to boot or startup and tries to diagnose and fix the problem. The feature scans system files , configuration and registry settings among other things and then tries to fix the issues that prevent your PC from working normally. Automatic Repair usually sets in without you prompting it, but typically, it happens after several restarts.

In Safe Mode, you can access Windows 10 and uninstall the Windows Update , drivers or software that may be causing the Windows 10 restart loop issue. If your computer has multiple Windows versions, wait for the operating system selection screen and then choose Change defaults or choose other options instead of selecting Windows Once you have the installation media, insert it into your PC and follow the steps in Automatic Repair to fix the restart loop problem.

Select the recovery partition as the primary device and reboot your PC. If you had just installed an app before the Windows restart loop issue began, you can uninstall the software while in Safe Mode and Windows will start normally again.

To do this, right-click the application in the Start menu and select Uninstall. A Windows 10 reset reinstalls system files without damaging your data. From here, you can follow the steps in our guide on how to reset Windows We hope you were able to fix the Windows reboot loop using any of the solutions listed here and your PC is running normally again. If so, check out our how to set up an automatic backup system for Windows guide and free system cloning apps you can use to backup your entire Windows system in case the restart loop occurs again.

You can also automatically backup important Windows folders with OneDrive and keep your information safely copied into the cloud. Elsie is a technology writer and editor with a special focus on Windows, Android and iOS. She writes about software, electronics and other tech subjects, her ultimate goal being to help people out with useful solutions to their daily tech issues in a simple, straightforward and unbiased style.

Read Elsie’s Full Bio. We will never spam you, unsubscribe at any time. Table of Contents. Subscribe on YouTube! Did you enjoy this tip? We cover Windows, Mac, software and apps, and have a bunch of troubleshooting tips and how-to videos. Click the button below to subscribe! The 4 Best Wearable Translators. Subscribe to Help Desk Geek. Do not share my Personal Information.

Windows 10 keeps restarting loop free

Was this reply helpful? Yes No. Sorry this жмите help. Choose where you want to search below Search Search the Community.

Search the community and support articles Windows Windows 10 Search Community member. I have been trying to reset my alienware aurora pc running on windows 10 because of a trustedinstaller virus. I am in the reset, and my computer keeps restarting followed by a message windows 10 keeps restarting loop free that a problem was keeping the computer from getting up and running and that an update would be http://replace.me/2300.txt. I have tried ethernet, wifi, and no internet to install the update.

It says just a moment продолжить about minutes and then flashes to the alienware screen, and then then it goes back to the screen that says I need to update to get up and running. Keps has happened about 10 times, even after I turned off the computer and windows 10 keeps restarting loop free it back on. What should I do? This thread is locked. You can follow rsstarting question or vote as helpful, but you cannot reply to this thread.

I have the same question Report abuse. Details required :. Cancel Submit. MaritzaCapiro Independent Advisor. Try to enter Safe Mode with network network function to repair Windows. Interrupt the normal boot process of your Windows 10 PC If Windows 10 fails to boot normally three times over, the windoows time it enters by default in an Automatic Repair mode.

Using this mode, you can boot into Safe Mode. To trigger the Automatic Windows 10 keeps restarting loop free mode, you must interrupt the normal boot process three consecutive times: use the reset or the power button on your Windows 10 PC to stop it during boot, before it finishes loading Windows If windows 10 keeps restarting loop free use the power button, you might have to keep it pressed for at least 4 seconds to force the power off Then you proceed to repair the computer: With a reset, all of your Installed applications are lost, but you get an option to save your files if you want.

If a system image from the OEM exists-called a recovery partition, then it also gives you an option to restore it. It would make your PC load to default factory settings. Navigate to Troubleshooting section, как сообщается здесь. Select Reset. If windows 10 keeps restarting loop free select keep my files, your files would be kept.

After selecting the desired options, you are presented with a confirmation, something like this- This indicates what you have chosen.

Click on Reset and the resetting should begin. Let us know if these steps help you to resolve the issue. Thanks for your feedback. How satisfied are you with this reply? Thanks for your feedback, it helps us improve the site. Mark St Independent Advisor. Reboot and check how it works. Use Safe Mode. If afer this the issue persists that reinstall OS usind bootable device. Let me know if you have any продолжить чтение. In reply to Mark St Restartinng am in the process of factory resetting.

I cannot do anything except for click windlws the same two screens and go to bios. Hi CKR Did you try to use bootable device and restore OS from this? This site in other languages x.

[Windows 10 keeps restarting loop free

Previous Windows versions would need a full reinstall to resolve the restart loop. However, with Windows 10, you can quickly troubleshoot and fix an endless reboot loop plus any other problems you may be experiencing.

There are several reasons why your computer is stuck in a restart loop, which is characterized by failure of Windows to load up correctly once you power on your PC. Instead of booting normally, the PC will fail to reach the logon screen before it resets to the boot screen and tries to load Windows.

From here on, the operating system is caught in an endless loop of booting and crashing, rendering your PC impossible to use. Unplugging all such peripherals from your PC and performing a hard reset may help resolve the infinite reboot loop. You can leave only your keyboard, mouse and monitor and then unplug your PC from the power outlet. If your computer comes with a removable battery, remove it and then hold the power button down for about 15 seconds until it goes off. Put the battery back in, plug the wall power back into your PC and try to restart it.

If Windows 10 is still stuck in a restart loop after unplugging peripherals and performing a hard reset , you can try to bypass the restart screen using the Function FN key. Hold the FN key down as you power on your PC, and while still holding the key, tap the Windows key to bypass the restart. If this works, you should see the login screen and you can continue using your PC normally. Let us know if these steps help you to resolve the issue.

Thanks for your feedback. How satisfied are you with this reply? Thanks for your feedback, it helps us improve the site. Mark St Independent Advisor.

Reboot and check how it works. Use Safe Mode. If afer this the issue persists that reinstall OS usind bootable device. Let me know if you have any questions. In reply to Mark St I am in the process of factory resetting. I cannot do anything except for click through the same two screens and go to bios.

Hi CKR Did you try to use bootable device and restore OS from this? Ask a new question. This thread is locked. You can follow the question or vote as helpful, but you cannot reply to this thread.

Threats include any threat of suicide, violence, or harm to another. Any content of an adult theme or inappropriate to a community web site. Any image, link, or discussion of nudity. Any behavior that is insulting, rude, vulgar, desecrating, or showing disrespect. Any behavior that appears to violate End user license agreements, including providing product keys or links to pirated software.

Unsolicited bulk mail or bulk advertising. Any link to or advocacy of virus, spyware, malware, or phishing sites. Any other inappropriate content or behavior as defined by the Terms of Use or Code of Conduct. Any image, link, or discussion related to child pornography, child nudity, or other child abuse or exploitation. Thanks for reaching out.

I will be happy to assist you in this regard. Or, If you have a restore point, perform a system restore. On the installation window, click on repair.