Windows 10 cant setup a homegroup on this computer free download. How to Fix Windows Can’t Set up a HomeGroup on This Computer [MiniTool Tips]

The message I get when I try to set up a homegroup on this computer is “Windows can’t set up a homegroup on this computer”. I have tried everything that has been suggested on troubleshooting forums I have searched on the web about this problem but with no success. I am trying to create a network with this computer and a Windws 10 64 bit Dell laptop.

It was suggested that I remove the homegroup from the Dell and set up a new homegroup on the HP but the HP won’t let me set up a new homegroup. Where have I gone wrong? Go to Solution. Hello; Allow me to welcome you to the HP forums! I read your post about problems setting up a HomeGroup under Win10 and wanted to help. If they helped resolve your issue, please click “Accept As Solution” to help others find similar information.

Thank you for your prompt reply. Click Start, type ” Services. Locate and double click the Windows Firewall service. Click the Log On tab, 4. Set both Password fields blank, 6.

Click Apply and then OK , 7. Repeat these steps for the Base Filtering Engine service. Restart both services. Again it didn’t allow me to start Peer Networking Grouping with ” Error The account specified for this service is different from the account specified for other services running in the same process” appearing again, so I’m back where I started.

I’d welcome any other solution you could offer. As I said in my last post, I was having no luck getting my network set up, but after going through the fixes suggested by WAWood I realized that fixating on setting up a Homegroup was not getting me anywhere. The following are the procedures that seemed the most likely to have success.

First try was to modify the registry using a suggestion from:. Click Start, type regedit in Search Bar, and then click regedit in the Programs list. Note: If you are prompted for an administrator password or confirmation, type your password or click Continue. Check whether the “DisabledComponents” registry key exists. If so, let’s move on the next steps. Double click the “DisabledComponents” registry key and modify the value to 0. If the key doesn’t exist, please create the key above and assign the value 0 e.

Exit Registry Editor, and then restart the computer. So far no change. On to the next fix from:. From an elevated CMD prompt, type in the following command:. Delete the following file:. Reboot the computer. In the two boxes just below this text box were two boxes titled Password and Confirm password each of these boxes contained 14 dots. Clicked on Apply.

Clicked on the General tab and clicked on the Start button Yay it actually started. Rebooted the computer. From there I was able to set up a Homegroup and then I was able the join that Homegroup on my wirelessly connected laptop and viola I have a network. Hi, I hope you are still watching this thread. I followed your instructions but have ground to a halt. Some background. I have just loaded Windows 10 Home onto a new PC. It has the “can’t set up homegroup”problem.

I also have a laptop on Windows 10 basic, the single language version they sell in Asia. When I started up the new PC, it showed the homegroup as ready to join but failed at the password stage with can’t set up etc. I left the homegroup on the laptop, rebooted, and was asked to start a new one which I did, then changed the generic password and tried that on the PC – no success. Naturally I’ve tried the troubleshooters.

Back to your solution. After the first stage of adding DisabledComponents, after re boot the network centre said ready to create, ha ha I thought, progress. Of course I failed at the password stage with the same can’t set up etc. I then went on to the second stage. I rebooted anyway. I then went back via regedit to services, there was no Peer Network Grouping. Thus I am here. Any thoughts? I would really like to help you with this problem, so I went back through the steps I took to finally solve my problem.

I am going to say that getting “Peer Networking Grouping” running was what solved my problem. To see if it is running go to. If this is the case then I’m not sure I can help you, but if the “Peer Network Grouping” service does not look like this then double click on “Peer Network Grouping”, click on the “Log On” tab and make the changes noted in my directions and click on the “General” tab and see if you can start it from there.

Click OK and it should be running. I wish you the best of luck and If you tell me what you see when you follow this procedure I will try to help but I am by no means an IT expert, just a guy who tries to fix what I can before resorting to turning things over to the real experts. Many thanks indeed for responding. Peer Name Resolution isn’t working either but as that is to do with remote assistance and W10 Home doesn’t allow remote PC control, I’m unsure if that is important. It gives error 0x I should add, my PC is connected via ethernet rather than wireless, so my issue is possible not P2P related.

Just to clairify, are you saying that both of the Windows 10 PCs you are trying to network are connected via ethernet cable? This would seem to be the easiest way to network two computers, but apparently, as it is in most computer related situations, things are never as simple as they seem.

If by reload, you mean reinstalling Windows 10, I hesitate recommending that because it means, at least in my case, reinstalling tons of software you have already installed, but if you haven’t loaded a bunch of stuff on the computer or you don’t mind rebuilding your computer to it’s former state, a reinstall is worth a try.

I was looking around the net for tips on networking two connected computer and all I got was recommendations about wireless, so I was probably wording my search incorrectly. I will continue to try find something that will help in your particular circumstance and pass it on to you when I do.

Many, many thanks for your easy to follow instructions. I had been tearing my hair out not that I have much anyway over this problem for days and just Googled to this site.

Fortunately for me I only needed to modify the IPv6 registry key to zero 0 and that was it! What I don’t understand is why your approach to the issue doesn’t seem to appear on Windows 10 forums or perhaps I haven’t searched hard enough.

Anyway, I now have all our PC’s communicating with each other so once again, many many thanks for your help. Didn’t find what you were looking for? Ask the community. Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.

Showing results for. Search instead for. Did you mean:. Fix Windows 10 Update Issues. Create an account on the HP Community to personalize your profile and ask a question. Your account also allows you to connect with HP support faster, access a personal dashboard to manage all of your devices in one place, view warranty information, case status and more.

It has been a while since anyone has replied. Simply ask a new question if you would like to start the discussion again. All forum topics Previous Topic Next Topic. Level 3. Message 1 of HP Recommended. Operating System: Microsoft Windows 10 bit. Tags 2. Level Message 2 of Message 3 of For example, for the Windows Firewall service, follow the steps: 1.

Message 4 of New member.

Windows 10 cant setup a homegroup on this computer free download.How to Fix Windows Can’t Set up a HomeGroup on This Computer [MiniTool News]

 
It suggested Network troubleshooter, which didn’t find anything, either. Yes No. I had no idea HomeGroups required IPv6, and my HomeGroups always always gave me problem, I would set it up, and see the systems, try to access and it would say the system wasn’t present. Windows 10 Windows 8. When you click OK, it invites you to join the homegroup again. To learn how to share files, see Share files in File Explorer. Select the libraries and devices you want to share with the homegroup.

[How to Fix Windows Can’t Set up a HomeGroup on This Computer

Проституция в Испании запрещена, а сеньор Ролдан был человеком осторожным. Он уже не один раз обжигался, когда полицейские чиновники выдавали себя за похотливых туристов. Я хотел бы с ней покувыркаться. Ролдан сразу решил, что это подстава.

HomeGroup from start to finish – Microsoft Support

You can use our previous Windows 10 guide to rename your PC. Make sure Network discovery , File and printer sharing , and HomeGroup connections are enabled on your private network. Your computer can only belong to one HomeGroup, if the it’s connected to a different one, make sure to follow the steps to leave the HomeGroup before trying to join. If you still can’t create or join a new computer to a HomeGroup, Microsoft is also including a diagnostic tool to fix common problems. Although we focus on configuring and managing HomeGroup on Windows 10, you can also connect Windows 7 and Windows 8.

How do you share files and other resources on your local network? Do you use HomeGroup? Let us know in the comments below. Mauro Huculak is technical writer for WindowsCentral. His primary focus is to write comprehensive how-tos to help users get the most out of Windows 10 and its many related technologies.

US Edition. Contact me with news and offers from other Future brands Receive email from us on behalf of our trusted partners or sponsors. Mauro Huculak. Topics Windows 10 Help. See all comments Oh I got an awesome idea. Each and every time there’s an Update, W10 seems to think it’s a frigging great idea to wipe your sharing and home group settings, forcing you to go through each and every one of those steps again and again On every device you own. Do you know how fun it is having to do it pretty much every week?

I’m almost to the point of just going back to using USBs and Discs. I would opt out of the insider program to at least reduce how often this occurs but there’s a looping error every time I try, where I have to reset my computer to fix some security settings, they never get fixed during the reset, I check again and I’m asked to reset again.

After being a part of the Insider Program since the start early Enterprise builds I think I finally hit my breaking point with the Insider Preview. I love new features and I love giving back feedback and reports, but I am finally sick and tired of having to either re-enter very basic stuff every time an update comes out Or wiping my system to fix a problem. Does it work with my WDTV? One possible solution is creating another user account with admin rights and do insider stuff from there.

Posted from WC , , , , XL. You can simply use a USB stick and plug it into each device and not have to do anything,. I read it windows 10 HomeWork :D. Way too complicated a process MS, do your homework make it easy for your users. If it were any easierthen there’d be your neighbors playing your private videos A password is a must.

Yeah, first it was indeed easier than the manual setting up of shared network folders but HomeGroup really needs a major changes to make it simple for every user while still serving same purpose or even better. HomeGroup after all is intended for regular computer users but it seems I realize it still bit too many steps and fiddling around.

I think this is a reason why despite this is an old Windows 7 feature, majority of people still don’t use this feature. Another factor is Microsoft themselves didn’t even market this feature alot or at all.

HomeGroup is still good, it just needs way more simple way to set up yet secure and do similar or even better way of sharing stuff locally. HomeGroup should also need network profiling where it saves HomeGroup profiles on each network setup so a user don’t need a manual setup everytime which is annoying for users. Nice article! Will help users leverage the power of home group! Forgot whs can also be added as well. Re: IPV6, check your router to make sure it’s turned on there too.

My Netgear has it turned off by default. OMG I bet that’s it! I had no idea HomeGroups required IPv6, and my HomeGroups always always gave me problem, I would set it up, and see the systems, try to access and it would say the system wasn’t present. Or after a fresh reboot the system would be nowhere to be seen.

I do keep IPv6 on, just cause why the hell not. I wonder if that’s the root of my HomeGroup problems. Pardon my ignorance, but with OneDrive being a thing and all, what is the point of homegroups?

Ondrive require internet to deliver things. While homegroup is a small lan connection with systems that are in same network. Onedrive is great if you have a small amount of data but I have about 50TB which is impossible via Onedrive or any cloud.

I gave up on home group thing, never worked for me. Shareit is much easier for me. Please can someone post a link to that background wallpaper?

It looks cool Posted from Windows Central for Windows I have never looked into home groups before, would it offer any advantage over using the shared folders on r2? Highly recommend unchecking “Turn on automatic setup of network connected devices”–can be such a headache. Windows 10 Mobile should be able to connect to the homegroup as well. It would be really nice to just grab a file from your PC and stick it on your phone via a homegroup without all of the work of One Drive.

Leave your homegroup. You can’t delete a homegroup, but if everyone leaves the homegroup it will be gone. You can then set up a new homegroup if you’d like. Change network discovery, file and printer sharing, HomeGroup connection, and advanced security options. HomeGroup is available in Windows 10, Windows 8. When you set up a PC with Windows 8. If a homegroup already exists on your home network, you can join it.

Open HomeGroup by swiping in from the right edge of the screen, tapping Settings or if you’re using a mouse, pointing to the lower-right corner of the screen, moving the mouse pointer up, and then clicking Settings , tapping or clicking Change PC settings , tapping or click Network , and then tapping or clicking HomeGroup. After you create a homegroup, the other PCs running Windows 10, Windows 8. Tap or click the control under Media devices if you want to allow devices on the network, such as TVs and game consoles, to play your shared content.

Open File Explorer by swiping in from the right edge of the screen, tapping Search or if you’re using a mouse, pointing to the upper-right corner of the screen, moving the mouse pointer down, and then clicking Search , entering File Explorer in the search box, and then tapping or clicking File Explorer.

Under Homegroup , tap or click the user account name of the person whose libraries you want to get to. To select libraries to share with all the members of your homegroup, swipe in from the right edge of the screen, tap Settings , and then tap Change PC settings. If you’re using a mouse, point to the upper-right corner of the screen, move the mouse pointer down, click Settings , and then click Change PC settings.

Then tap or click HomeGroup. To prevent a file or folder from being shared with anyone, tap or click the Share tab, and then tap or click Stop sharing. To change the level of access to a file or folder, tap or click the Share tab, and then select either Homegroup view or Homegroup view and edit. If you need to share a location such as a drive or system folder, use the Advanced sharing option.

Open the Print menu of the app you want to print from, select the homegroup printer, and then tap or click Print. Use this setting to share media with all devices on your network. Note: Shared media isn’t secure.

Anyone connected to your network can receive your shared media. Swipe in from the right edge of the screen, and then tap Search. If you’re using a mouse, point to the lower-right corner of the screen, move the mouse pointer up, and then click Search. In the search box, enter homegroup , and then click Settings.

Tap or click Change the password , and then follow the instructions. You might be asked for an admin password or to confirm your choice. When you set up a PC with Windows 7, a homegroup is created automatically.

On the Share with other home computers running Windows 7 page, click Create a homegroup , and then follow the instructions. You can access files and resources on other homegroup PCs, but you can’t share your own files and resources with the homegroup.

You’ll need the homegroup password, which you can get from the person who created the homegroup. Note: If you don’t see the Join now button, there might not be a homegroup available. In the navigation pane the left pane , under Homegroup , click the user account name of the person whose files you want to access.

In the file list, double-click the library you want to access, and then double-click the file or folder you want. When you created or joined your homegroup, you selected the libraries you wanted to share with other people in the homegroup.

Libraries are initially shared with Read access, which means that you can look at or listen to what’s in the library, but you can’t make changes to the files in it. You can adjust the level of access later, and you can exclude specific files and folders from sharing.

Clear the check box for each library you don’t want shared, and then click Save changes. To prevent the file or folder from being shared with anyone, in the toolbar, click Share with , and then click Nobody.

To share the file or folder with some people but not others, in the toolbar, click Share with , click Specific people , select each person you want to share with, and then click Add. Click Share when you’re finished. After the printer is shared, you can access it through the Print dialog box in any program, just like a printer that’s directly connected to your PC. Select the Printers check box, and then click Save changes. On the PC the printer is physically connected to, click the Start button, click Control Panel , type homegroup in the search box, and then click HomeGroup.

If you don’t already have a driver installed for the printer, click Install driver in the dialog box that appears. Change settings for network discovery, file sharing, Public folder sharing, password-protected sharing, homegroup connections, and file sharing connections.

Windows 10 Windows 8. Notes: HomeGroup has been removed from Windows 10 Version Notes: If a homegroup already exists on your network, you’ll be asked to join it instead of creating a new one. Notes: PCs that are turned off, hibernating, or asleep won’t be available as part of the homegroup.

What’s a homegroup? Create a homegroup When you set up a PC with Windows 8. To create a homegroup Open HomeGroup by swiping in from the right edge of the screen, tapping Settings or if you’re using a mouse, pointing to the lower-right corner of the screen, moving the mouse pointer up, and then clicking Settings , tapping or clicking Change PC settings , tapping or click Network , and then tapping or clicking HomeGroup.

Tap or click Create. Select the libraries and devices you want to share with the homegroup. Notes: PCs that are turned off, hibernating, or asleep won’t appear as part of the homegroup.

Create a homegroup When you set up a PC with Windows 7, a homegroup is created automatically. Notes: PCs that are turned off, hibernating, or asleep won’t appear in the navigation pane. Need more help? Join the discussion. Was this information helpful? Yes No. Thank you! Any more feedback? The more you tell us the more we can help. Can you help us improve? Resolved my issue. Clear instructions. Easy to follow.

No jargon.